scp novgorod@login.zih.tu-dresden.de:/home/novgorod/IKTP/FilesForJINSTpaper/* . Figure 1 ----- v ----- /media/olga/B26C-C918/PETSysPC/JINST_files/FilesForFiguresJINST/Figure1/ Figure_1_Labeling.png PETsysBoxElectronics.png -------------------------------------------------------------------------------------------------------------------------------- Figure 2 ----- v ----- /media/olga/B26C-C918/PETSysPC/JINST_files/FilesForFiguresJINST/Figure2/ PETsysAssembly_Olga_2.png PETsysAssembly_Olga.png PETsysAssembly.png -------------------------------------------------------------------------------------------------------------------------------- Figure 3 ----- v ----- /media/olga/B26C-C918/PETSysPC/JINST_files/FilesForFiguresJINST/Figure3/ CeBr3Crystals_small_bigg.png CeBr3Crystals_small_bigg_withWhiteBorder.png Matrix_5x5x20_CeBr3_1.png Matrix_5x5x20_CeBr3_2.png Matrix_5x5x20_CeBr3_3.png -------------------------------------------------------------------------------------------------------------------------------- Figure 4 ----- v ----- File: /media/olga/B26C-C918/PETSysPC/JINST_files/rootFiles/listmode_DAQ125-02-004_0_HPGe_2inch_CeBr3_AmBe_histogram.root or /media/olga/B26C-C918/PETSysPC/JINST_files/FilesForFiguresJINST/Figure4/listmode_DAQ125-02-004_0_HPGe_2inch_CeBr3_AmBe_histogram.root Steering file: CeBr3_Spectra_ADC_PETsys_Scope_DAQ125_Calibrated_final_figures_4_5_6_7.steer Execute: ./bin/makePlot --file CeBr3_Spectra_ADC_PETsys_Scope_DAQ125_Calibrated_final_figures_4_5_6_7.steer --JINSTstyle --printType eps -------------------------------------------------------------------------------------------------------------------------------- Figure 5: ----- v ----- File: /media/olga/B26C-C918/PETSysPC/JINST_files/rootFiles/hadd_example_000182_190_analysed.root /media/olga/B26C-C918/PETSysPC/JINST_files/rootFiles/hadd_example_000287_294_analysed.root or /media/olga/B26C-C918/PETSysPC/JINST_files/FilesForFiguresJINST/Figure5/hadd_example_000182_190_analysed.root /media/olga/B26C-C918/PETSysPC/JINST_files/FilesForFiguresJINST/Figure5/hadd_example_000287_294_analysed.root Steering file: CeBr3_Spectra_ADC_PETsys_Scope_DAQ125_Calibrated_final_figures_4_5_6_7.steer Execute: ./bin/makePlot --file CeBr3_Spectra_ADC_PETsys_Scope_DAQ125_Calibrated_final_figures_4_5_6_7.steer --JINSTstyle --printType eps -------------------------------------------------------------------------------------------------------------------------------- Figure 6: ----- v ----- File: /media/olga/B26C-C918/PETSysPC/JINST_files/rootFiles/CalibrationOfADC_ScionixPMT.root /media/olga/B26C-C918/PETSysPC/JINST_files/FilesForFiguresJINST/Figure6/ Which file produces this output files: cd /home/olga/IKTP/GEANT4/Analysis/run_laptop source runroot.sh #Files below had to be fitted for each peak, peaks are in the CalibrateADC file ./bin/CalibrateADC Whish files were used for analysis: /media/olga/B26C-C918/PETSysPC/JINST_files/rootFiles/hadd_example_000182_190_analysed.root /media/olga/B26C-C918/PETSysPC/JINST_files/rootFiles/hadd_example_000287_294_analysed.root or /media/olga/B26C-C918/PETSysPC/JINST_files/FilesForFiguresJINST/Figure6/hadd_example_000182_190_analysed.root /media/olga/B26C-C918/PETSysPC/JINST_files/FilesForFiguresJINST/Figure6/hadd_example_000287_294_analysed.root Na22: run 204 - was with Na22 - 10x10x30 CeBr3 without white walls run 287 - was with Na22 Watch channel 1 for ADC PMT data, other data has MAPMT Steering file: CeBr3_Spectra_ADC_PETsys_Scope_DAQ125_Calibrated_final_figures_4_5_6_7.steer Execute: ./bin/makePlot --file CeBr3_Spectra_ADC_PETsys_Scope_DAQ125_Calibrated_final_figures_4_5_6_7.steer --JINSTstyle --printType eps -------------------------------------------------------------------------------------------------------------------------------- Figure 7: ----- v ------ File: /media/olga/B26C-C918/PETSysPC/JINST_files/rootFiles/CalibrationOfPetSys.root /media/olga/B26C-C918/PETSysPC/JINST_files/FilesForFiguresJINST/Figure7/CalibrationOfPetSys.root Which file produces this output files: cd /home/olga/IKTP/GEANT4/Analysis/run_laptop source runroot.sh ./bin/CalibratePetSys Whish files were used for analysis: H50 54V: the same file like for Sensl chip4 ch 29 hadd_test_AmBe_Sensl27V_CeBr3_10-20-15_10092021_16092021_17092021_run1_27_analysed.root H25 57V: hadd_callH25_57V_AmBe_test_AmBe_Sensl28V_H25_57V_17deg_CeBr3_3600s_10-20-15_03092021_run0_23_analysed.root Sensl 27V: hadd_test_AmBe_Sensl27V_CeBr3_10-20-15_10092021_16092021_17092021_run1_27_analysed.root Steering file: CeBr3_Spectra_ADC_PETsys_Scope_DAQ125_Calibrated_final_figures_4_5_6_7.steer Execute: ./bin/makePlot --file CeBr3_Spectra_ADC_PETsys_Scope_DAQ125_Calibrated_final_figures_4_5_6_7.steer --JINSTstyle --printType eps -------------------------------------------------------------------------------------------------------------------------------- Figure 8: H25 5x5x20 CeBr3 - ----- v ---- File: /media/olga/B26C-C918/PETSysPC/JINST_files/rootFiles/CalibrationOfADC_ScionixPMT_figures_8_9.root Which file produces this output files: cd /home/olga/IKTP/GEANT4/Analysis/run_laptop ./bin/CalibrateSiPMScopeNa22 Whish files were used for analysis: 55V: hadd_test_Na22AmBe_Sensl27V_H25_55V_17deg_CeBr3_5x300s_10-20-15_analysed.root /media/olga/B26C-C918/PETSysPC/JINST_files/FilesForFiguresJINST/Figure8/copiedFromPETsysPC/ test_AmBeNa22_Sensl26V_H25_55V_17deg_CeBr3_3600s_10-20-15_05092021_run1_analysed.root test_AmBeNa22_Sensl26V_H25_55V_17deg_CeBr3_3600s_10-20-15_05092021_run1_CTRanalysed.root test_AmBeNa22_Sensl26V_H25_55V_17deg_CeBr3_3600s_10-20-15_05092021_run2_analysed.root test_AmBeNa22_Sensl26V_H25_55V_17deg_CeBr3_3600s_10-20-15_05092021_run2_CTRanalysed.root test_AmBeNa22_Sensl26V_H25_55V_17deg_CeBr3_3600s_10-20-15_05092021_run3_analysed.root test_AmBeNa22_Sensl26V_H25_55V_17deg_CeBr3_3600s_10-20-15_05092021_run3_CTRanalysed.root 56V: hadd_test_AmBe_Sensl27V_H25_56V_17deg_CeBr3_3600s_10-20-15_calibSenslH25_16092021_17092021_run1_17_analysed.root hadd_test_AmBe_Sensl27V_H25_56V_17deg_CeBr3_3600s_10-20-15_calibSenslH25_16092021_16092021_run1_10_analysed.root 57V: hadd_callH25_57V_AmBe_test_AmBe_Sensl28V_H25_57V_17deg_CeBr3_3600s_10-20-15_03092021_run0_23_analysed.root hadd_callH25_57V_Na22_test_Na22AmBe_Sensl27V_H25_57V_17deg_CeBr3_1500s_10-20-15_analysed.root hadd_test_AmBe_Sensl27V_CeBr3_10-20-15_10092021_16092021_17092021_run1_27_analysed.root 57V too: hadd_test_AmBe_Sensl28V_H25_58V_17deg_CeBr3_3600s_10-20-15_03092021_run1-20_analysed.root 58V: hadd_test_AmBeNa22_Sensl29V_H25_58V_17deg_CeBr3_3600s_10-20-15_05092021_run1_3_analysed.root /media/olga/B26C-C918/PETSysPC/JINST_files/FilesForFiguresJINST/Figure8/copiedFromPETsysPC hadd_test_AmBeNa22_Sensl29V_H25_58V_17deg_CeBr3_3600s_10-20-15_05092021_run1_3_analysed.root test_AmBeNa22_Sensl29V_H25_58V_17deg_CeBr3_3600s_10-20-15_05092021_run1_analysed.root test_AmBeNa22_Sensl29V_H25_58V_17deg_CeBr3_3600s_10-20-15_05092021_run1_CTRanalysed.root test_AmBeNa22_Sensl29V_H25_58V_17deg_CeBr3_3600s_10-20-15_05092021_run2_analysed.root test_AmBeNa22_Sensl29V_H25_58V_17deg_CeBr3_3600s_10-20-15_05092021_run2_CTRanalysed.root test_AmBeNa22_Sensl29V_H25_58V_17deg_CeBr3_3600s_10-20-15_05092021_run3_analysed.root test_AmBeNa22_Sensl29V_H25_58V_17deg_CeBr3_3600s_10-20-15_05092021_run3_CTRanalysed.root Steering file: CeBr3_EenergyRes_ADC_PETsys_Scope_final_figures_8_9_11.steer Execute: ./bin/makePlot --file CeBr3_EenergyRes_ADC_PETsys_Scope_final_figures_8_9_11.steer --JINSTstyle --printType eps -------------------------------------------------------------------------------------------------------------------------------- Figure 9: ----- v ----- File: /media/olga/B26C-C918/PETSysPC/JINST_files/rootFiles/CalibrationOfADC_ScionixPMT_figures_8_9.root Which file produces this output files: cd /home/olga/IKTP/GEANT4/Analysis/run_laptop ./bin/CalibrateSiPMScopeNa22 Whish files were used for analysis: 26V: hadd_test_Na22AmBe_Sensl27V_H25_55V_17deg_CeBr3_5x300s_10-20-15_analysed.root 27V: hadd_test_AmBe_Sensl27V_H25_56V_17deg_CeBr3_3600s_10-20-15_calibSenslH25_16092021_17092021_run1_17_analysed.root hadd_test_AmBe_Sensl27V_H25_56V_17deg_CeBr3_3600s_10-20-15_calibSenslH25_16092021_16092021_run1_10_analysed.root hadd_callH25_57V_AmBe_test_AmBe_Sensl28V_H25_57V_17deg_CeBr3_3600s_10-20-15_03092021_run0_23_analysed.root hadd_callH25_57V_Na22_test_Na22AmBe_Sensl27V_H25_57V_17deg_CeBr3_1500s_10-20-15_analysed.root hadd_test_AmBe_Sensl27V_CeBr3_10-20-15_10092021_16092021_17092021_run1_27_analysed.root 28V too: hadd_test_AmBe_Sensl28V_H25_58V_17deg_CeBr3_3600s_10-20-15_03092021_run1-20_analysed.root 29V hadd_test_AmBeNa22_Sensl29V_H25_58V_17deg_CeBr3_3600s_10-20-15_05092021_run1_3_analysed.root Steering file: CeBr3_EenergyRes_ADC_PETsys_Scope_final_figures_8_9_11.steer Execute: ./bin/makePlot --file CeBr3_EenergyRes_ADC_PETsys_Scope_final_figures_8_9_11.steer --JINSTstyle --printType eps -------------------------------------------------------------------------------------------------------------------------------- Figure 10: ----- v ----- File: FILE fileADC5 /media/olga/B26C-C918/ADC/TUD/hadd_example_CeBr3_5x5x20mm_noWW_287_294_callibrated.root FILE fileADC10 /home/olga/IKTP/GEANT4/Analysis/run_laptop/transfer/hadd_example_CeBr3_10x10x30mm_noWW_180_203_callibrated20012022.root FILE filePETsysH25_57V /home/olga/IKTP/GEANT4/Analysis/run_laptop/hadd_test_AmBe_Sensl28V_H25_58V_17deg_CeBr3_3600s_10-20-15_03092021_run1-20_analysed.root FILE filePETsysH25_10x10x30_57V /home/olga/IKTP/GEANT4/Analysis/run_laptop/hadd_test_AmBe_H25_10x10x30_57V_H50_54V_nodeg_CeBr3_3600s_10-20-15_11052022_run_1-13_analysed.root FILE filePETsysSensl6_5x5x20_27V /home/olga/IKTP/GEANT4/Analysis/run_laptop/hadd_test_AmBe_Sensl_5x5x20_27V_H50_54V_nodeg_CeBr3_3600s_10-20-15_13072022_run_134_1-15_analysed.root FILE filePETsysSensl29_27V /home/olga/IKTP/GEANT4/Analysis/run_laptop/hadd_test_AmBe_Sensl27V_CeBr3_10-20-15_10092021_16092021_17092021_run1_27_analysed.root Which file produces this output files: after calibration AnalysisSensl.sh - to run shell script: Whish files were used for analysis: #----------------------------------------------------------------------- ADC files recalibrated in the steering file as the calibration is linear. PETsys files were calibrated with analysis - #----------------------------------------------------------------------- #Calibration for H25 57V 10CeBr3 #25931, #4868, #1000 #na22: #test_Na22_AmBe_H25_10x10x30_57V_H50_54V_nodeg_CeBr3_300s_10-20-15_11052022_run_0 #hadd_test_AmBe_H25_10x10x30_57V_H50_54V_nodeg_CeBr3_3600s_10-20-15_11052022_run_1-13 #----------------------------------------------------------------------- #H25 5x5x20 calibrate: #na22: #hadd_test_Na22_Sensl28V_H25_57V_17deg_CeBr3_300s_10-20-15_03092021_1-3 #AmBe: #hadd_test_AmBe_Sensl28V_H25_58V_17deg_CeBr3_3600s_10-20-15_03092021_run1-20 #----------------------------------------------------------------------- #sensl 10x10x30 27V: #hadd_test_Na22_Sensl27V_H50_54V_17deg_CeBr3_300s_10-20-15_16092021_run1-4 #hadd_test_AmBe_Sensl27V_CeBr3_10-20-15_10092021_16092021_17092021_run1_27 ## Sensl ch29 10x10x30mm3 Saturation Curve #45626, #12607, #1000 #----------------------------------------------------------------------- #Sensl 5x5x20 ch 6 27V #!!!# #!!!#hadd_hadd_test_AmBe_Sensl_5x5x20_27V_H50_54V_nodeg_CeBr3_3600s_10-20-15_13072022_run_134_1-15_Na1-3 #shifted - test_Na22_Sensl_5x5x20_27V_10-20-15_H50_54V_10-20-15_300s_13072022_run_132 #hadd_test_AmBe_Sensl_5x5x20_27V_H50_54V_nodeg_CeBr3_3600s_10-20-15_13072022_run_134_1-15 #41288, #15124, #1000 #----------------------------------------------------------------------- Steering file:Callibrated_Spectra_Comparisson_PETsys5_10CeBr_final_figures_10.steer Execute: ./bin/makePlot --file Callibrated_Spectra_Comparisson_PETsys5_10CeBr_final_figures_10.steer --JINSTstyle --printType png -------------------------------------------------------------------------------------------------------------------------------- Figure 11: ----- v ----- File: /media/olga/B26C-C918/PETSysPC/JINST_files/rootFiles/CalibrationOfADC_ScionixPMT_figures_8_9.root Which file produces this output files: cd /home/olga/IKTP/GEANT4/Analysis/run_laptop ./bin/CalibrateSiPMScopeNa22 Whish files were used for analysis: Same files for Figure 10 - were fit and fitted after background subtraction: cd /home/olga/IKTP/GEANT4/Analysis/run_laptop //ADC 5x5x20mm //./bin/FitNa22Spectrum /media/olga/B26C-C918/ADC/TUD/hadd_example_CeBr3_5x5x20mm_noWW_280_294_callibrated20012022.root Hist_EnergyCal_ch_0 1 //ADC 10x10x30mm //./bin/FitNa22Spectrum /media/olga/B26C-C918/ADC/TUD/hadd_example_CeBr3_10x10x30mm_noWW_180_203_callibrated20012022.root Hist_EnergyCal_ch_0 1 //./bin/FitNa22Spectrum /home/olga/IKTP/ROOTkitgit/runit/Cs_Skala_016_6050_central_20deg_15_20_30_100s_henergy.root ch92_Cs_Skala_016_6050_central_20deg_15_20_30_100s 2 //H25 5x5x20mm //./bin/FitNa22Spectrum /home/olga/IKTP/GEANT4/Analysis/run_laptop/hadd_test_AmBe_Sensl28V_H25_58V_17deg_CeBr3_3600s_10-20-15_03092021_run1-20_analysed.root Channels_EnergyCall_chip_4_ch_29 //./bin/FitNa22Spectrum hadd_test_Na22_Sensl28V_H25_57V_17deg_CeBr3_300s_10-20-15_03092021_1-3_analysed.root Channels_EnergyCall_chip_4_ch_29 //H25 10x10x30mm 3.4 //./bin/FitNa22Spectrum /media/olga/B26C-C918/PETSysPC/AmBe_Files/PETsys/H25_10CeBr/hadd_test_AmBe_H25_10x10x30_57V_H50_54V_nodeg_CeBr3_3600s_10-20-15_11052022_run_1-13_analysed.root Channels_EnergyCall_chip_3_ch_29 //./bin/FitNa22Spectrum test_Na22_AmBe_H25_10x10x30_57V_H50_54V_nodeg_CeBr3_300s_10-20-15_11052022_run_0_analysed.root Channels_EnergyCall_chip_3_ch_29 //./bin/FitNa22Spectrum hadd_test_AmBe_H25_10x10x30_57V_H50_54V_nodeg_CeBr3_3600s_10-20-15_11052022_run_1-13_analysed.root Channels_EnergyCall_chip_3_ch_29 //Sensl 5x5x20mm // ./bin/FitNa22Spectrum test_AmBeNa22_Sensl_5x5x20_27V_H50_54V_nodeg_CeBr3_300s_10-20-15_18052022_run_1-15Am_1-4Na_call_CTRanalysed.root Channels_EnergyCall_chip_3_ch_6 // ./bin/FitNa22Spectrum hadd_hadd_test_AmBe_Sensl_5x5x20_27V_H50_54V_nodeg_CeBr3_3600s_10-20-15_13072022_run_134_1-15_Na1-3_analysed.root Channels_EnergyCall_chip_3_ch_6 //Na22 spectrum: // ./bin/FitNa22Spectrum test_AmBeNa22_Sensl_5x5x20_27V_10-20-15_H50_54V_10-20-15_300s_13072022_run_133_1_analysed.root Channels_EnergyCall_chip_3_ch_6 //sensl 10x10x30mm 3.4 // ./bin/FitNa22Spectrum hadd_test_AmBe_Sensl27V_CeBr3_10-20-15_10092021_1609202_17092021_run1_27_analysed.root Channels_EnergyCall_chip_5_ch_29 // ./bin/FitNa22Spectrum /media/olga/B26C-C918/PETSysPC/AmBe_Files/PETsys/Sensl_10CeBr/hadd_test_AmBe_Sensl27V_CeBr3_10-20-15_10092021_16092021_17092021_run1_27_analysed.root Channels_EnergyCall_chip_5_ch_29 //08.09.2023 // ./bin/FitNa22Spectrum hadd_test_AmBe_Sensl27V_CeBr3_10-20-15_10092021_16092021_17092021_run1_27_analysed.root Channels_EnergyCall_chip_5_ch_29 // ./bin/FitNa22Spectrum hadd_test_Na22_Sensl27V_H50_54V_17deg_CeBr3_300s_10-20-15_16092021_run1-4_analysed.root Channels_EnergyCall_chip_5_ch_29 //Scope data //One channel was repeated 4 times. All 4 channels is just one channel copied 4 times. hadd_Traces-LED-H25_57V_17deg_CeBr3_Na22_AmBe_21092021TraceDB_0_200_many_out.root Steering file: CeBr3_EenergyRes_ADC_PETsys_Scope_final_figures_8_9_11.steer Execute: ./bin/makePlot --file CeBr3_EenergyRes_ADC_PETsys_Scope_final_figures_8_9_11.steer --JINSTstyle --printType eps -------------------------------------------------------------------------------------------------------------------------------- Figure 12 ----- v ----- File: /media/olga/B26C-C918/PETSysPC/JINST_files/rootFiles/J15_measurement_200619_1140_Overvoltage_3_0V_300s_run2_analysed.root /media/olga/B26C-C918/PETSysPC/JINST_files/FilesForFiguresJINST/Figure12/J15_measurement_200619_1140_Overvoltage_3_0V_300s_run2_analysed.root Steering file: TimeResolutionELBEOV1_3V_graphs_final_figures_12_13.steer Execute: ./bin/makePlot --file TimeResolutionELBEOV1_3V_graphs_final_figures_12_13.steer --printType eps --JINSTstyle -------------------------------------------------------------------------------------------------------------------------------- Figure 13 ----- v ----- File: /media/olga/B26C-C918/PETSysPC/JINST_files/rootFiles/J15_measurement_200619_0905_Overvoltage_1_0V_300s_run2_analyse_fit.root /media/olga/B26C-C918/PETSysPC/JINST_files/rootFiles/J15_measurement_200619_0905_Overvoltage_1_5V_300s_run2_analyse_fit.root /media/olga/B26C-C918/PETSysPC/JINST_files/rootFiles/J15_measurement_200619_1100_Overvoltage_2_0V_300s_run2_analyse_fit.root /media/olga/B26C-C918/PETSysPC/JINST_files/rootFiles/J15_measurement_200619_1140_Overvoltage_3_0V_300s_run2_analyse_fit.root or /media/olga/B26C-C918/PETSysPC/JINST_files/FilesForFiguresJINST/Figure13/ J15_measurement_200619_1140_Overvoltage_3_0V_300s_run2_analyse_fit.root J15_measurement_200619_0905_Overvoltage_1_5V_300s_run2_analyse_fit.root J15_measurement_200619_1100_Overvoltage_2_0V_300s_run2_analyse_fit.root J15_measurement_200619_0905_Overvoltage_1_0V_300s_run2_analyse_fit.root Steering file: TimeResolutionELBEOV1_3V_graphs_final_figures_12_13.steer Execute: ./bin/makePlot --file TimeResolutionELBEOV1_3V_graphs_final_figures_12_13.steer --printType eps --JINSTstyle -------------------------------------------------------------------------------------------------------------------------------- Figure 14 ----- v ----- File: /media/olga/B26C-C918/PETSysPC/JINST_files/rootFiles/CTR_PETsys.root Which file produces this output files: cd /home/olga/IKTP/GEANT4/Analysis/run_laptop ./bin/CTR_SiPMPetSysNa22 Whish files were used for analysis: cd /home/olga/IKTP/GEANT4/Analysis/run_laptop ./start_CTR.sh out_CTR_fits.txt - file with fit results //gr_CTR_2S_H25_H50_57V_10CeBr3_thr_err ->Write("gr_CTR_2S_H25_H50_57V_10CeBr3_thr_err"); test_Na22_H25_10x10x30_57V_15-20-15_H50_54V_10-20-15_300s_12052022_run_3.root test_Na22_H25_10x10x30_57V_20-20-15_H50_54V_10-20-15_300s_12052022_run_3.root test_Na22_H25_10x10x30_57V_2-20-15_H50_54V_10-20-15_300s_12052022_run_3.root test_Na22_H25_10x10x30_57V_5-20-15_H50_54V_10-20-15_300s_12052022_run_3.root test_Na22_H25_10x10x30_57V_H50_54V_20deg_CeBr3_300s_10-20-15_12052022_run_3.root test_Na22_H25_10x10x30_57V_H50_54V_20deg_CeBr3_300s_15-20-15_12052022_run_3.root test_Na22_H25_10x10x30_57V_H50_54V_20deg_CeBr3_300s_20-20-15_12052022_run_3.root test_Na22_H25_10x10x30_57V_H50_54V_20deg_CeBr3_300s_2-20-15_12052022_run_3.root test_Na22_H25_10x10x30_57V_H50_54V_20deg_CeBr3_300s_5-20-15_12052022_run_3.root //gr_CTR_2S_H25_57V_Block_5x5x20_H50_CeBr3_thr_err ->Write("gr_CTR_2S_H25_57V_Block_5x5x20_H50_CeBr3_thr_err"); test_Na22_H25_Block_5x5x20_57V_5-20-15_H50_54V_10-20-15_300s_19052022_run_16.root test_Na22_H25_Block_5x5x20_57V_20-20-15_H50_54V_10-20-15_300s_19052022_run_16.root test_Na22_H25_Block_5x5x20_57V_1-20-15_H50_54V_10-20-15_300s_19052022_run_16.root test_Na22_H25_Block_5x5x20_57V_10-20-15_H50_54V_10-20-15_300s_19052022_run_16.root test_Na22_H25_Block_5x5x20_57V_25-20-15_H50_54V_10-20-15_300s_19052022_run_16.root test_Na22_H25_Block_5x5x20_57V_15-20-15_H50_54V_10-20-15_300s_19052022_run_16.root test_Na22_H25_Block_5x5x20_57V_3-20-15_H50_54V_10-20-15_300s_19052022_run_16.root //gr_CTR_2S_5x5x20_H25_H50_57V_CeBr3_thr_err ->Write("gr_CTR_2S_5x5x20_H25_H50_57V_CeBr3_thr_err"); //gr_CTR_5x5x20_H25_H50_57V_CeBr3_thr_err ->Write("gr_CTR_5x5x20_H25_H50_57V_CeBr3_thr_err"); test_Na22_H25_57V_H50_54V_20deg_CeBr3_300s_10-20-15_11052022_run_1.root test_Na22_H25_57V_H50_54V_20deg_CeBr3_300s_1-20-15_11052022_run_1.root test_Na22_H25_57V_H50_54V_20deg_CeBr3_300s_12-20-15_11052022_run_1.root test_Na22_H25_57V_H50_54V_20deg_CeBr3_300s_15-20-15_11052022_run_1.root test_Na22_H25_57V_H50_54V_20deg_CeBr3_300s_17-20-15_11052022_run_1.root test_Na22_H25_57V_H50_54V_20deg_CeBr3_300s_20-20-15_11052022_run_1.root test_Na22_H25_57V_H50_54V_20deg_CeBr3_300s_25-20-15_11052022_run_1.root test_Na22_H25_57V_H50_54V_20deg_CeBr3_300s_3-20-15_11052022_run_1.root test_Na22_H25_57V_H50_54V_20deg_CeBr3_300s_5-20-15_11052022_run_1.root test_Na22_H25_57V_H50_54V_20deg_CeBr3_300s_7-20-15_11052022_run_1.root Sensl: //gr_CTR_2S_5x5x20_Sensl_ch3_H50_57V_CeBr3_thr_err ->Write("gr_CTR_2S_5x5x20_Sensl_ch3_H50_57V_CeBr3_thr_err"); //gr_CTR_2S_5x5x20_Sensl_ch6_H50_57V_CeBr3_thr_err ->Write("gr_CTR_2S_5x5x20_Sensl_ch6_H50_57V_CeBr3_thr_err"); //gr_CTR_2S_5x5x20_Sensl_ch28_H50_57V_CeBr3_thr_err->Write("gr_CTR_2S_5x5x20_Sensl_ch28_H50_57V_CeBr3_thr_err"); //gr_CTR_2S_5x5x20_Sensl_ch29_H50_57V_CeBr3_thr_err->Write("gr_CTR_2S_5x5x20_Sensl_ch29_H50_57V_CeBr3_thr_err"); path_copy=/media/olga/B26C-C918/PETSysPC/TimeResolution/PETsysTestsMay2022/data/ test_Na22_Sensl_5x5x20_27V_2-20-15_H50_54V_10-20-15_300s_13072022_run_132.root test_Na22_Sensl_5x5x20_27V_5-20-15_H50_54V_10-20-15_300s_13072022_run_132.root test_Na22_Sensl_5x5x20_27V_7-20-15_H50_54V_10-20-15_300s_13072022_run_132.root test_Na22_Sensl_5x5x20_27V_10-20-15_H50_54V_10-20-15_300s_13072022_run_132.root test_Na22_Sensl_5x5x20_27V_12-20-15_H50_54V_10-20-15_300s_13072022_run_132.root test_Na22_Sensl_5x5x20_27V_15-20-15_H50_54V_10-20-15_300s_13072022_run_132.root test_Na22_Sensl_5x5x20_27V_17-20-15_H50_54V_10-20-15_300s_13072022_run_132.root test_Na22_Sensl_5x5x20_27V_20-20-15_H50_54V_10-20-15_300s_13072022_run_132.root test_Na22_Sensl_5x5x20_27V_30-20-15_H50_54V_10-20-15_300s_13072022_run_132.root Steering file: CTR_vs_Trh1_PetSys_final_figures_14.steer Execute: ./bin/makePlot --file CTR_vs_Trh1_PetSys_final_figures_14.steer --printType eps --JINSTstyle -------------------------------------------------------------------------------------------------------------------------------- Figure 15 ----- v ----- CoSource_Measurements_Scatch.png -------------------------------------------------------------------------------------------------------------------------------- Figure 16 ----- v ----- File: /media/olga/B26C-C918/PETSysPC/JINST_files/rootFiles/out_co_exp2_rates_h50_CeBr.root or /media/olga/B26C-C918/PETSysPC/JINST_files/FilesForFiguresJINST/Figure16/out_co_exp2_rates_h50_CeBr.root Which file produces this output files: cd /media/olga/B26C-C918/PETSysPC/JINST_files/FilesForFiguresJINST/Figure16/6050 source runroot.sh root -l co_new_analysis_eventrate.C +x Whish files were used for analysis: /media/olga/B26C-C918/PETSysPC/JINST_files/FilesForFiguresJINST/Figure16/6050 Co_Skala_029_20deg_15_20_30_100s_single.root Co_Skala_130_20deg_15_20_30_100s_henergy.root Co_Skala_036_20deg_15_20_30_100s_henergy.root Co_Skala_130_20deg_15_20_30_100s_single.root Co_Skala_016_6050_central_20deg_15_20_30_100s_henergy.root Co_Skala_036_20deg_15_20_30_100s_single.root Co_Skala_190_20deg_15_20_30_100s_henergy.root Co_Skala_016_6050_central_20deg_15_20_30_100s_single.root Co_Skala_048_20deg_15_20_30_100s_henergy.root Co_Skala_190_20deg_15_20_30_100s_single.root Co_Skala_021_6050_central_20deg_15_20_30_100s_henergy.root Co_Skala_048_20deg_15_20_30_100s_single.root Co_Skala_255_20deg_15_20_30_100s_henergy.root Co_Skala_021_6050_central_20deg_15_20_30_100s_single.root Co_Skala_076_20deg_15_20_30_100s_henergy.root Co_Skala_255_20deg_15_20_30_100s_single.root Co_Skala_029_20deg_15_20_30_100s_henergy.root Co_Skala_076_20deg_15_20_30_100s_single.root On PETsys computer: ssh -XY novgorod@login.zih.tu-dresden.de ssh -XY daq@192.168.14.5 /HDD/PETsys_data/HighRateStudies_Co_Cs/disc_lsb_t1_57/data_Co60_Cs137/Co60/rootfiles/6050 Steering file:Rates_Co_Exp2_graphs_final_figures_16_17_18_19.steer Execute: ./bin/makePlot --file Rates_Co_Exp2_graphs_final_figures_16_17_18_19.steer --printType eps --JINSTstyle -------------------------------------------------------------------------------------------------------------------------------- Figure 17 ----- v ----- File: /media/olga/B26C-C918/PETSysPC/JINST_files/rootFiles/Cs_Skala_180_20deg_15_20_30_100s_henergy.root /media/olga/B26C-C918/PETSysPC/JINST_files/rootFiles/Cs_Skala_016_6050_central_20deg_15_20_30_100s_henergy.root /media/olga/B26C-C918/PETSysPC/JINST_files/rootFiles/Cs_Skala_027_6050_central_20deg_15_20_30_100s_henergy.root or /media/olga/B26C-C918/PETSysPC/JINST_files/FilesForFiguresJINST/Figure17/ Cs_Skala_016_6050_central_20deg_15_20_30_100s_henergy.root Cs_Skala_027_6050_central_20deg_15_20_30_100s_henergy.root Cs_Skala_180_20deg_15_20_30_100s_henergy.root Steering file:Rates_Co_Exp2_graphs_final_figures_16_17_18_19.steer Execute: ./bin/makePlot --file Rates_Co_Exp2_graphs_final_figures_16_17_18_19.steer --printType eps --JINSTstyle -------------------------------------------------------------------------------------------------------------------------------- Figure 18 ----- v ----- File: /media/olga/B26C-C918/PETSysPC/JINST_files/rootFiles/Cs_Skala_016_6050_central_20deg_15_20_30_100s_single_analysed.root /media/olga/B26C-C918/PETSysPC/JINST_files/rootFiles/Cs_Skala_016_6025_central_20deg_15_20_30_100s_single_analysed.root or /media/olga/B26C-C918/PETSysPC/JINST_files/FilesForFiguresJINST/Figure18/ Cs_Skala_016_6025_central_20deg_15_20_30_100s_single_analysed.root Cs_Skala_016_6050_central_20deg_15_20_30_100s_single_analysed.root Which file produces this output files: cd /home/olga/IKTP/GEANT4/Analysis/run_laptopon daq PETsys computer: AnalysisCTR.sh path=/home/daq/petsys_2019_2020_test/no_PETblock/disc_lsb_t1_57/data_Co60_Cs137/Cs137/rootfiles ./bin/ReadPetSys_matrix_CTR_noFit ${i}.root 1 ${parameters[0]} ${parameters[1]} ${parameters[2]} 285 ReadPetSys_matrix_simple.cc - produces files with time difference between two consequent events Whish files were used for analysis: Cs_Skala_016_6025_central_20deg_15_20_30_100s_single.root Cs_Skala_016_6050_central_20deg_15_20_30_100s_single.root Steering file:Rates_Co_Exp2_graphs_final_figures_16_17_18_19.steer Execute: ./bin/makePlot --file Rates_Co_Exp2_graphs_final_figures_16_17_18_19.steer --printType eps --JINSTstyle -------------------------------------------------------------------------------------------------------------------------------- Figure 19 ------ v ----- File: /media/olga/B26C-C918/PETSysPC/JINST_files/rootFiles/Cs_Skala_016_6050_central_20deg_15_20_30_100s_single_analysed.root /media/olga/B26C-C918/PETSysPC/JINST_files/rootFiles/Cs_Skala_016_6025_central_20deg_15_20_30_100s_single_analysed.root or /media/olga/B26C-C918/PETSysPC/JINST_files/FilesForFiguresJINST/Figure19/ Cs_Skala_016_6025_central_20deg_15_20_30_100s_single_analysed.root Cs_Skala_016_6050_central_20deg_15_20_30_100s_single_analysed.root Which file produces this output files: cd /home/olga/IKTP/GEANT4/Analysis/run_laptop Whish files were used for analysis: at PETsys pc: ssh -XY novgorod@login.zih.tu-dresden.de ssh daq@192.168.14.5 /HDD/PETsys_data/HighRateStudies_Co_Cs/disc_lsb_t1_57/data_Co60_Cs137/Cs137/rootfiles ReadPetSys_matrix_simple.cc - produces files with time difference between two consequent events I reanalised them for making time differenece plots Cs_Skala_016_6025_central_20deg_15_20_30_100s_single.root Cs_Skala_016_6050_central_20deg_15_20_30_100s_single.root Files converted from PETsys format Cs_Skala_027_6050_central_20deg_15_20_30_100s_henergy.root Cs_Skala_016_6050_central_20deg_15_20_30_100s_henergy.root Cs_Skala_180_20deg_15_20_30_100s_henergy.root For analysis to get simple difference between concequent time intervals: cd /home/daq/analysis_C/AnalizeTrees/src/ReadPetSys_matrix_simple.cc cd /home/daq/analysis_C/build emacs -nw AnalysisCTR.sh select correct files and correct analysis Steering file:Rates_Co_Exp2_graphs_final_figures_16_17_18_19.steer Execute: ./bin/makePlot --file Rates_Co_Exp2_graphs_final_figures_16_17_18_19.steer --printType eps --JINSTstyle --------------------------------------------------------------------------------------------------------------------------------