### Geometrie Reinforcement Substructure ###

# welded Reinforcement Mesh, FU01, Axis 10 #
Name: POS_1-Matte_FU01
Type: Sheet
Sheet: [ [ 0.035, 0.035, 0.035 ], [ 5.465, 0.035, 0.035 ], [ 5.465, 5.465, 0.035 ], [ 0.035, 5.465, 0.035 ] ]
Comment: The sheet shall be copied one time, by 0.73 [m]
Copy: [ 0, 0, 0.73 ], 1

# Pos. 25, FU01, Axis 10 #
Name: POS_25-FU01
Type: Polyline
(1)
Polyline: [ [ 0.395, 0.035, 0.045 ], [ 0.035, 0.035, 0.045 ], [ 0.035, 0.035, 0.755 ], [ 0.395, 0.035, 0.755 ] ]
Comment: The polyline shall be copied 54 times, each by 0.1 [m]
Copy: [ 0, 0.1, 0 ], 54
Comment: Mirror the 55 polylines
Mirror: [ 2.75, 0, 0 ]
(2)
Polyline: [ [ 0.035, 0.395, 0.045 ], [ 0.035, 0.035, 0.045 ], [ 0.035, 0.035, 0.755 ], [ 0.035, 0.395, 0.755 ] ]
Comment: The polyline shall be copied 54 times, each by 0.1 [m]
Copy: [ 0.1, 0, 0 ], 54
Comment: Mirror the 55 polylines
Mirror: [ 0, 2.75, 0 ]

# Pos. 1, WLW01, Axis 10 #
Name: POS_1-WLW01
Type: Polyline
Polyline: [ [ 2.3, 0.575, 0.035 ], [ 2.9, 0.575, 0.035 ], [ 2.9, 0.575, 1.385 ] ]
Comment: The polyline shall be copied 29 times, each by 0.15 [m]
Copy: [ 0, 0.15, 0 ], 29

# Pos. 2 (Pos. 4) WLW01, Axis 10 #
Name: POS_2-WLW01
Type: Line
Line: [ 2.868, 0.575, 0.785 ], [ 2.868, 0.575, 3.515 ]
Comment: The polyline shall be copied 29 times, each by 0.15 [m]
Copy: [ 0, 0.15, 0 ], 29

# Pos. 3 WLW01, Axis 10 #
Name: POS_3-WLW01
Type: Line
Line: [ 2.632, 0.575, 0.785 ], [ 2.632, 0.575, 3.515 ]
Comment: The polyline shall be copied 35 times, each by 0.125 [m]
Copy: [ 0, 0.125, 0 ], 35

# Pos. 5, WLW01, Axis 10 #
Name: POS_5-WLW01
Type: Polyline
Polyline: [ [ 2.7875, 0.575, 2.375 ], [ 2.7875, 0.575, 2.945 ], [ 2.9375, 0.575, 2.945 ], [ 2.9375, 0.575, 2.375 ] ]
Comment: The polyline shall be copied 35 times, each by 0.125 [m]
Copy: [ 0, 0.125, 0 ], 35

# Pos. 22 WLW01, Axis 10 #
Name: POS_22-WLW01
Type: Line
(1)
Line: [ 2.57, 0.525, 0.845 ], [ 2.57, 4.975, 0.845 ]
Comment: The polyline shall be copied 19 times, each by 0.1 [m]
Copy: [ 0, 0, 0.1 ], 19
(2)
Line: [ 2.93, 0.525, 0.845 ], [ 2.93, 4.975, 0.845 ]
Comment: The polyline shall be copied 21 times, each by 0.1 [m]
Copy: [ 0, 0, 0.1 ], 21

# Pos. 24, WLW01, Axis 10 #
Name: POS_24-WLW01
Type: Polyline
Polyline: [ [ 3.2, 0.575, 0.035 ], [ 2.6, 0.575, 0.035 ], [ 2.6, 0.575, 1.385 ] ]
Comment: The polyline shall be copied 35 times, each by 0.125 [m]
Copy: [ 0, 0.125, 0 ], 35

# Pos. 28, WLW01, Axis 10 #
Name: POS_28-WLW01
Type: Polyline
Polyline: [ [ 2.595, 0.885, 0.845 ], [ 2.595, 0.525, 0.845 ], [ 2.905, 0.525, 0.845 ], [ 2.905, 0.885, 0.845 ] ]
Comment: The polyline shall be copied 19 times, each by 0.1 [m]
Copy: [ 0, 0, 0.1 ], 19
Comment: Mirror the 20 polylines
Mirror: [ 0, 2.75, 0 ]

# welded Reinforcement Mesh, FU02, Axis 20 #
Name: POS_1-Matte_FU02
Type: Sheet
(1)
Sheet: [ [ 16.285, 0.525, 0.035], [ 19.215, 0.525, 0.035 ], [ 19.215, 4.975, 0.035 ], [ 16.285, 4.975, 0.035 ] ]
Comment: The sheet shall be copied one time, by 0.33 [m]
Copy: [ 0, 0, 0.33 ], 1 
(2)
Sheet: [ [ 17.085, 0.9, 0.535], [ 18.415, 0.9, 0.535 ], [ 18.415, 4.6, 0.535 ], [ 17.085, 4.6, 0.535 ] ]
Comment: The sheet shall be copied one time, by 0.23 [m]
Copy: [ 0, 0, 0.23 ], 1 

# Pos. 3, FU02, Axis 20 #
Name: POS_3-FU02
Type: Polyline
Polyline: [ [ 17.085, 0.95, 0.545 ], [ 17.085, 0.95, 0.755 ], [ 18.415, 0.95, 0.755 ], [ 18.415, 0.95, 0.545 ] ]
Comment: The polyline shall be copied 24 times, each by 0.15 [m]
Copy: [ 0, 0.15, 0 ], 24

# Pos. 4, FU02, Axis 20 #
Name: POS_4-FU02
Type: Polyline
Polyline: [ [ 17.895, 0.95, 0.545 ], [ 17.895, 0.95, 0.755 ], [ 18.105, 0.95, 0.755 ], [ 18.105, 0.95, 0.545 ] ]
Comment: The polyline shall be copied 24 times, each by 0.15 [m]
Copy: [ 0, 0.15, 0 ], 24
Comment: Mirror the 25 polylines
Mirror: [ 17.75, 0, 0 ]

# Pos. 5, FU02, Axis 20 #
Name: POS_5-FU02
Type: Polyline
Polyline: [ [ 16.7, 0.5225, 0.045 ], [ 16.7, 0.5225, 0.765 ], [ 16.7, 0.7325, 0.765 ], [ 16.7, 0.7325, 0.045 ] ]
Comment: The polyline shall be copied 14 times, each by 0.15 [m]
Copy: [ 0.15, 0, 0 ], 14
Comment: Mirror the 15 polylines
Mirror: [ 0, 2.75, 0 ]

# Pos. 6, FU02, Axis 20 #
Name: POS_6-FU02
Type: Polyline
Polyline: [ [ 16.285, 0.575, 0.045 ], [ 16.285, 0.575, 0.355 ], [ 19.215, 0.575, 0.355 ], [ 19.215, 0.575, 0.045 ] ]
Comment: The polyline shall be copied 29 times, each by 0.15 [m]
Copy: [ 0, 0.15, 0 ], 29

# Pos. 7, FU02, Axis 20 #
Name: POS_7-FU02
Type: Polyline
Polyline: [ [ 16.285, 0.575, 0.035 ], [ 16.285, 0.575, 0.765 ], [ 16.615, 0.575, 0.765 ], [ 16.615, 0.575, 0.035 ] ]
Comment: The polyline shall be copied 29 times, each by 0.15 [m]
Copy: [ 0, 0.15, 0 ], 29
Comment: Mirror the 30 polylines
Mirror: [ 17.75, 0, 0 ]

# Pos. 8, FU02, Axis 20 #
Name: POS_8-FU02
Type: Line
Line: [ 16.295, 0.53, 0.755 ], [ 16.295, 4.97, 0.755 ]
Line: [ 16.295, 0.53, 0.045 ], [ 16.295, 4.97, 0.045 ]
Line: [ 16.295, 0.53, 0.345 ], [ 16.295, 4.97, 0.345 ]
Comment: The lines shall be copied one time, by 0.31 [m]
Copy: [ 0.31, 0, 0 ], 1
Comment: Mirror the six lines
Mirror: [ 17.75, 0, 0 ]

# Pos. 9, FU02, Axis 20 #
Name: POS_9-FU02
Type: Polyline
Polyline: [ [ 17.1, 1.26, 0.745 ], [ 17.1, 0.9, 0.745 ], [ 17.1, 0.9, 0.555 ], [ 17.1, 1.26, 0.555 ] ]
Comment: The polyline shall be copied 13 times, each by 0.1 [m]
Copy: [ 0.1, 0, 0 ], 13
Comment: Mirror the 14 polylines
Mirror: [ 0, 2.75, 0 ]

# Pos. 10, FU02, Axis 20 #
Name: POS_10-FU02
Type: Polyline
Polyline: [ [ 17.085, 0.95, 0.045 ], [ 17.085, 0.95, 0.465 ], [ 18.415, 0.95, 0.465 ], [ 18.415, 0.95, 0.045 ] ]
Comment: The polyline shall be copied 24 times, each by 0.15 [m]
Copy: [ 0, 0.15, 0 ], 24

# Pos. 11, FU02, Axis 20 #
Name: POS_11-FU02
Type: Polyline
Polyline: [ [ 17.15, 0.9, 0.065 ], [ 17.15, 0.9, 0.465 ], [ 17.15, 4.6, 0.465 ], [ 17.15, 4.6, 0.065 ] ]
Comment: The polyline shall be copied 8 times, each by 0.15 [m]
Copy: [ 0.15, 0, 0 ], 8

# Pos. 12, FU02, Axis 20 #
Name: POS_12-FU02
Type: Line
Line: [ 16.285, 0.535, 0.775 ], [ 19.215, 0.535, 0.775 ]
Comment: The line shall be copied one time, by 0.19 [m]
Copy: [ 0, 0.19, 0 ], 1
Comment: Mirror the two lines
Mirror: [ 0, 2.75, 0 ]

# Pos. 14, FU02, Axis 20 #
Name: POS_14-FU02
Type: Polyline
Polyline: [ [ 16.295, 0.89, 0.755 ], [ 16.295, 0.53, 0.755 ], [ 16.655, 0.53, 0.755 ] ]
Polyline: [ [ 16.295, 0.89, 0.045 ], [ 16.295, 0.53, 0.045 ], [ 16.655, 0.53, 0.045 ] ]
Polyline: [ [ 16.295, 0.89, 0.345 ], [ 16.295, 0.53, 0.345 ], [ 16.655, 0.53, 0.345 ] ]
Comment: Mirror the 3 polylines
Mirror: [ 17.75, 0, 0 ]
Comment: Mirror the 6 polylines
Mirror: [ 0, 2.75, 0 ]

# Pos. 26, FU02, Axis 20 #
Name: POS_26-FU02
Type: Polyline
Polyline: [ [ 16.285, 0.575, 0.765 ], [ 16.285, 0.575, 0.055 ], [ 19.215, 0.575, 0.055 ], [ 19.215, 0.575, 0.765 ] ]
Comment: The polyline shall be copied 29 times, each by 0.15 [m]
Copy: [ 0, 0.15, 0 ], 29

# Pos. 1, Piers, Axis 20 #
Name: POS_1-ST
Type: Polyline
Polyline: [ [ 17.235, 1.135, 0.555 ], [ 17.805, 1.135, 0.555 ], [ 17.805, 1.135, 3.455 ] ]
Polyline: [ [ 17.235, 1.315, 0.555 ], [ 17.805, 1.315, 0.555 ], [ 17.805, 1.315, 3.455 ] ]
Comment: Mirror the two polylines
Mirror: [ 17.75, 0, 0 ]
Comment: The polylines shall be copied one time, by 1.52 [m]
Copy: [ 0, 1.52, 0 ], 1 

# Pos. 2, Piers, Axis 20 #
Name: POS_2-ST
Type: Polyline
Polyline: [ [ 17.235, 4.175, 0.555 ], [ 17.805, 4.175, 0.555 ], [ 17.805, 4.175, 3.455 ] ]
Polyline: [ [ 17.235, 4.265, 0.555 ], [ 17.805, 4.265, 0.555 ], [ 17.805, 4.265, 3.455 ] ]
Polyline: [ [ 17.235, 4.355, 0.555 ], [ 17.805, 4.355, 0.555 ], [ 17.805, 4.355, 3.455 ] ]
Comment: Mirror the three polylines
Mirror: [ 17.75, 0, 0 ]

# Pos. 66, FU02, Axis 20 #
Name: POS_66-FU02
Type: Polyline
Polyline: [ [ 17.67, 1.125, 0.925 ], [ 17.83, 1.125, 0.925 ], [ 17.83, 1.335, 0.925 ], [ 17.67, 1.335, 0.925 ] ]
Comment: The polyline shall be copied 13 times, each by 0.15 [m]
Copy: [ 0, 0, 0.15 ], 13
Comment: The polylines shall be copied two times, each by 0.15 [m]
Copy: [ 0, 1.52, 0 ], 2

# welded Reinforcement Mesh, FU03, Axis 30 #
Name: POS_1-Matte_FU03
Type: Sheet
Sheet: [ 31.535, 0.515, 0.765], [ 33.965, 0.515, 0.765 ], [ 33.965, 4.985, 0.765 ], [ 31.535, 4.985, 0.765 ]
Comment: The sheet shall be copied one time, by -0.33 [m]
Copy: [ 0, 0, -0.33 ], 1

# Pos. 5, FU03, Axis 30 #
Name: POS_5-FU03
Type: Polyline
Polyline: [ [ 31.535, 0.55, 0.445 ], [ 31.535, 0.55, 0.755 ], [ 33.965, 0.55, 0.755 ], [ 33.965, 0.55, 0.445 ] ]
Comment: The polyline shall be copied 22 times, each by 0.2 [m]
Copy: [ 0, 0.2, 0 ], 22

# Pos. 6, FU03, Axis 30 #
Name: POS_6-FU03
Type: Polyline
Polyline: [ [ 31.55, 0.945, 0.455 ], [ 31.55, 0.515, 0.455 ], [ 31.55, 0.515, 0.745 ], [ 31.55, 0.945, 0.745 ] ]
Comment: The polyline shall be copied 12 times, each by 0.2 [m]
Copy: [ 0.2, 0, 0 ], 12
Comment: Mirror the 13 polylines
Mirror: [ 0, 2.75, 0 ]

# Pos. 1, PF01, Axis 30 #
Name: POS_1-PF01
Type: Polyline
Polyline: [ [ 33.14, 0.575, 0.45 ], [ 32.64, 0.575, 0.45 ], [ 32.64, 0.575, 1.4 ] ]
Comment: The polyline shall be copied 29 times, each by 0.15 [m]
Copy: [ 0, 0.15, 0 ], 29
Comment: Mirror the 30 polylines
Mirror: [ 32.75, 0, 0 ]

# Pos. 2, PF01, Axis 30 #
Name: POS_2-PF01
Type: Polyline
Polyline: [ [ 32.65, 0.95, 0.868 ], [ 32.65, 0.52, 0.868 ], [ 32.85, 0.52, 0.868 ], [ 32.85, 0.95, 0.868 ] ]
Comment: The polyline shall be copied 12 times, each by 0.15 [m]
Copy: [ 0, 0, 0.15 ], 12
Comment: Mirror the 13 polylines
Mirror: [ 0, 2.75, 0 ]

# Pos. 3, PF01, Axis 30 #
Name: POS_3-PF01
Type: Polyline
Polyline: [ [ 32.472, 0.95, 2.866 ], [ 32.472, 0.52, 2.866 ], [ 33.028, 0.52, 2.866 ], [ 33.028, 0.95, 2.866 ] ]
Comment: Mirror the polyline
Mirror: [ 0, 2.75, 0 ]

# Pos. 4, PF01, Axis 30 #
Name: POS_4-PF01
Type: Line
(1)
Line: [ 32.704, 0.525, 1 ], [ 32.704, 4.975, 1 ]
Comment: The line shall be copied 11 times, each by 0.15 [m]
Copy: [ 0, 0, 0.15 ], 11
Comment: Mirror the 12 lines
Mirror: [ 32.75, 0, 0 ]
(2)
Line: [ 32.472, 0.525, 2.878 ], [ 32.472, 4.975, 2.878 ]
(3)
Line: [ 33.028, 0.525, 2.878 ], [ 33.028, 4.975, 2.878 ]
(4)
Line: [ 32.684, 0.525, 2.878 ], [ 32.684, 4.975, 2.878 ]
Comment: Mirror the line from (4)
Mirror: [ 32.75, 0, 0 ]
(5)
Line: [ 32.578, 0.525, 2.77 ], [ 32.578, 4.975, 2.77 ]
Line: [ 32.684, 0.525, 2.712 ], [ 32.684, 4.975, 2.712 ]
Comment: Mirror the two lines
Mirror: [ 32.75, 0, 0 ]

# Pos. 7, PF01, Axis 30 #
Name: POS_7-PF01
Type: Line
Line: [ 32.672, 0.575, 0.8 ], [ 32.672, 0.575, 2.89 ]
Comment: The line shall be copied 29 times, each by 0.15 [m]
Copy: [ 0, 0.15, 0 ], 29
Comment: Mirror the 30 lines
Mirror: [ 32.75, 0, 0 ]

# Pos. 8, PF01, Axis 30 #
Name: POS_8-PF01
Type: Polyline
Polyline: [ [ 32.625, 0.5625, 2.7 ], [ 32.46, 0.5625, 2.84 ], [ 32.46, 0.5625, 2.89 ], [ 33.04, 0.5625, 2.89 ], [ 33.04, 0.5625, 2.84 ], [ 32.875, 0.5625, 2.7 ] ]
Comment: The polyline shall be copied 35 times, each by 0.125 [m]
Copy: [ 0, 0.125, 0 ], 35


















