OpARA - Open Access Repository and ArchiveDas digitale Repositorium erfasst, speichert, erhält, erschließt und verbreitet digitale Forschungsergebnisse.https://opara.zih.tu-dresden.de:443/xmlui2024-03-28T17:29:33Z2024-03-28T17:29:33ZTest field datasets/photos with DJI Mavic Pro 2 camera and Nikon D300 cameraLiebold, Frankhttps://opara.zih.tu-dresden.de/xmlui/handle/123456789/61032024-03-18T14:31:19Z2024-01-01T00:00:00ZTest field datasets/photos with DJI Mavic Pro 2 camera and Nikon D300 camera
Liebold, Frank
test field and 4 scale bars with AICON 14 bit targets;
data belonging to publication section 2.7 https://doi.org/10.3390/rs15225283
2024-01-01T00:00:00ZFadenzugkraftmessung (Inline-Prozess)Friese, DannyHahn, LarsCherif, ChokriGolla, Ankehttps://opara.zih.tu-dresden.de/xmlui/handle/123456789/61022024-03-04T16:30:39Z2024-01-01T00:00:00ZFadenzugkraftmessung (Inline-Prozess)
Friese, Danny; Hahn, Lars; Cherif, Chokri; Golla, Anke
Messung der Fadenzukraft (-spannung) während der (simulierten) Garnablage
Garn ist während der Messung nicht getränkt (trocken)
2024-01-01T00:00:00ZProzesseinflussuntersuchung bei der FadentränkungFriese, Dannyhttps://opara.zih.tu-dresden.de/xmlui/handle/123456789/61012024-03-04T16:30:40Z2024-01-01T00:00:00ZProzesseinflussuntersuchung bei der Fadentränkung
Friese, Danny
Untersuchungen zu den Einflussparameter bei der Tränkung von Garnen; Charakterisierung mittels Zugversuchen (Verbundphysikalische Untersuchungen); Untersuchungen dienen als technologische Grundlage für die nachfolgende Konstruktion des robotergeführten Tränkungsmoduls (Fokus: sehr kompakte Bauweise für die kollisionsfreie Führung am Roboterflansch)
Prüfsoftware von ZwickRoell
2024-01-01T00:00:00ZExperimental analysis of residual stress evolution under cyclic mechanical loading in 42CrMo4+QT (1.7225) including parametrization dataSchneider, TomGibmeier, JensKästner, Markushttps://opara.zih.tu-dresden.de/xmlui/handle/123456789/60982024-02-29T11:45:19Z2024-01-01T00:00:00ZExperimental analysis of residual stress evolution under cyclic mechanical loading in 42CrMo4+QT (1.7225) including parametrization data
Schneider, Tom; Gibmeier, Jens; Kästner, Markus
This data set contains various results from (cyclic) tests with 42CrMo4+QT/SAE4140. The first part contains the results of cyclic 4-point bending tests on cuboid specimens. They were used to measure the residual stress. Each specimen was loaded with a certain number of load cycles, after which the test was stopped and the residual stress was measured. From this, the development of the residual stresses under the cyclic load can be determined.
The second part of the data set contains data from characterization tests. Various uniaxial tests were carried out on a material sample in order to obtain information for the parameterization of numerical models for predicting the development of residual stresses from the first part of this contribution.
2024-01-01T00:00:00Z