https://opara.zih.tu-dresden.de/xmlui/handle/123456789/583 2026-04-06T04:26:11Z https://opara.zih.tu-dresden.de/xmlui/handle/123456789/6098 Experimental analysis of residual stress evolution under cyclic mechanical loading in 42CrMo4+QT (1.7225) including parametrization data Schneider, Tom; Gibmeier, Jens; Kästner, Markus This data set contains various results from (cyclic) tests with 42CrMo4+QT/SAE4140. The first part contains the results of cyclic 4-point bending tests on cuboid specimens. They were used to measure the residual stress. Each specimen was loaded with a certain number of load cycles, after which the test was stopped and the residual stress was measured. From this, the development of the residual stresses under the cyclic load can be determined. The second part of the data set contains data from characterization tests. Various uniaxial tests were carried out on a material sample in order to obtain information for the parameterization of numerical models for predicting the development of residual stresses from the first part of this contribution. 2024-01-01T00:00:00Z https://opara.zih.tu-dresden.de/xmlui/handle/123456789/6046 Berechnungsfaktoren zur Ermittlung der Lastverteilung und der Zahnfußspannung von Kreuzverzahnungen Härtel, Hans Dieses Datenpaket enthält mehrere XLSX-Dateien mit Berechnungsfaktoren für Kreuzverzahnungen. Diese sind unterteilt in Berechnungsfaktoren YF für die Lastverteilung und in Berechnungsfaktoren YS für die Zahnfußspannung. Außerdem wird zwischen verschiedenen Geometrievarianten der Kreuzverzahnung unterschieden. Alle in der Datensammlung enthaltenen Werte sind das Ergebnis einer FEM-Serienrechnung. 2023-01-01T00:00:00Z https://opara.zih.tu-dresden.de/xmlui/handle/123456789/5999 Homogenized data magneto-active polymers Kalina, Karl Alexander; Gebhart, Philipp; Brummund, Jörg; Linden, Lennart; Sun, WaiChing; Kästner, Markus Herein, homogenized datasets for magneto-active polymers (MAPs) with stochastic particle distribution and reversible magneto-elastic behavior are provided. The data have been generated by using an in-house finite element code based on Matlab. For the calculation of the effective tensor values, 2D statistical volume elements (SVEs) have been used. The data can be applied to calibrate macroscopic surrogate models. 2023-01-01T00:00:00Z https://opara.zih.tu-dresden.de/xmlui/handle/123456789/5994 Forming and cutting at high strain rates Part 4: High-speed blanking Galiev, Elmar; Tulke, Marc Based on the material properties determined in "Forming and cutting at high strain rates Part 1" and "Part 2", the applicability of the methodology and the material characteristics are verified using a high-spped blanking process of DC06. This data collection includes the numerical model of the Butzen as well as the experimental data of the high-speed shear cutting process and figures of the resulting slugs. A detailed description of the experimental setup and the method is published in https://doi.org/10.21741/9781644902417-4. 2023-01-01T00:00:00Z