The OPARA service was recently upgraded to a new technical platform. You are visiting the outdated OPARA website. Please use https://opara.zih.tu-dresden.de/ for new data submissions. Previously stored data will be migrated in near future and then the old version of OPARA will finally be shut down. Existing DOIs for data publications remain valid.

This community is open access and publicly accessible.

Anonymous users may not see all communities or collections. Please log in to see your accessible communities and colletions.

Recent Submissions

  • Raw data of the cyclic tests on the beam specimensOpen Access Icon 

    Birkner, Dennis (Technische Universität Dresden, 2024)
    This dataset contains the raw data of the cyclic tests on the beam specimens. Two concrete mixes were investigated (C30 and C80). The specimens are named with the concrete type followed by a roman number (e.g. C30-II). The ...
  • Experimental results with discontinuous supertag parsingOpen Access Icon 

    Ruprecht, Thomas (Technische Universität Dresden, 2024)
    This archive contains all log files for the experiments described in chapter 6 of my phd thesis "On the Extraction of Lexicalized Grammars and Parsing via Supertagging for Discontinuous Constituent Structures." It involves ...
  • disutapaOpen Access Icon 

    Ruprecht, Thomas (Technische Universität Dresden, 2024)
    This project is an implementation of the supertagging-based parser for discontinuous constituent trees as described in my phd thesis "On the Extraction of Lexicalized Grammars and Parsing via Supertagging for Discontinuous ...
  • Experimental analysis of residual stress evolution under cyclic mechanical loading in 42CrMo4+QT (1.7225) including parametrization dataOpen Access Icon 

    Schneider, Tom; Gibmeier, Jens; Kästner, Markus (Technische Universität Dresden, 2024)
    This data set contains various results from (cyclic) tests with 42CrMo4+QT/SAE4140. The first part contains the results of cyclic 4-point bending tests on cuboid specimens. They were used to measure the residual stress. ...
  • Comparative validation of machine learning algorithms for surgical workflow and skill analysis with the HeiChole benchmarkOpen Access Icon 

    van der Linden, Lize Mari; Wagner, Martin; Bodenstedt, Sebastian; Speidel, Stefanie (Technische Universität Dresden, 2023)
    The data consists of endoscopic videos from general surgery operating rooms. The data was obtained during laparoscopic surgeries at the University Hospital of Heidelberg and its affiliate hospitals, forming a joint center ...
  • Virtual RFT 2022Open Access Icon 

    Andrees, Fabienne; Josupeit, Judith; Greim, Leonore; Sanchez Rivas, Sarah (Technische Universität DresdenTechnische Universität Dresden, 2024)
    "VR_RFT_Input" contains Unity-logs and survey data collected between 2022-2023 by J. Josupeit, L. Greim and S. Sanchez Rivas under the experiment title "Replication of Field-Dependency and Cybersickness". The data are ...
  • Manually delineated glacier calving front locations of 27 marine-terminating glaciers from 2013 to 2021Open Access Icon 

    Loebel, Erik; Scheinert, Mirko; Horwath, Martin; Humbert, Angelika; Sohn, Julia; Heidler, Konrad; Liebezeit, Charlotte; Zhu, Xiao Xiang (Technische Universität Dresden, 2024)
    This dataset provides 898 manually delineated glacier calving front positions of 23 Greenland glaciers, two glaciers at the Antarctic Peninsula, one glacier in Svalbard and one glacier in Patagonia from 2013 to 2021. For ...
  • Measurements for different PEDOT:PF6 fiber networksOpen Access Icon 

    Kleemann, Hans (Technische Universität Dresden, 2024)
    Each folder represents one or more unique PEDOT:PF6 fiber networks. Different types of measurement might be found for each network, including impedance measurements ("Autolab" folder), transistor measurements ("SMU" folder) ...
  • Dresden in vivo OCT Dataset of the Middle EarOpen Access Icon 

    Steuer, Svea; Golde, Jonas; Morgenstern, Joseph; Liu, Peng (Technische Universität Dresden, 2023)
    The data collection contains 43 optical coherence tomography (OCT) volumes from both healthy and pathological middle ears of 29 subjects recorded with a non-invasive endoscopic OCT device applicable in vivo. Due to the ...
  • Berechnungsfaktoren zur Ermittlung der Lastverteilung und der Zahnfußspannung von KreuzverzahnungenOpen Access Icon 

    Härtel, Hans (Technische Universität Dresden, 2023)
    Dieses Datenpaket enthält mehrere XLSX-Dateien mit Berechnungsfaktoren für Kreuzverzahnungen. Diese sind unterteilt in Berechnungsfaktoren YF für die Lastverteilung und in Berechnungsfaktoren YS für die Zahnfußspannung. ...
  • Terminus area change of 17 key glaciers of the Antarctic Peninsula from 2013 to 2023 derived from remote sensing and deep learningOpen Access Icon 

    Loebel, Erik; Baumhoer, Celia A.; Dietz, Andreas; Scheinert, Mirko; Horwath, Martin (Technische Universität Dresden, 2023)
    Glacier terminus area changes are derived using the rectilinear box method applied to time series of glacier calving front locations. Terminus changes are provided in text file and image format. The following glaciers are ...
  • Simulation Data: Indoor Positioning Systems in Connected Aircraft CabinsOpen Access Icon 

    Schwarzbach, Paul; Ninnemann, Jonas (Technische Universität Dresden, 2023)
    The dataset consist of three .csv files containing the visibility analysis (LOS/OLOS/NLOS) from ray launching inside the aircraft cabin, the anchor states and the results of the probabilistic range sampling. In total 8 ...
  • Dental anxiety and psychologial distress in 263 patients from Albania and GermanyOpen Access Icon 

    Berth, Hendrik (Technische Universität Dresden, 2023)
    The dataset contains questionnaire data from 263 patients (N = 133 Germans and N = 130 Albanians). All patients completed the questionnaires Dental Anxiety Scale (DAS) and the Brief Symptom Inventory (BSI-18). Patients ...
  • Raw data of the cyclic tests on the cylindrical specimensOpen Access Icon 

    Birkner, Dennis (Technische Universität Dresden, 2023)
    This dataset contains the raw data of the cyclic tests on concrete cylinders to determine the number of cycles to failure and the stiffness develpment of the different batches. Two concrete mixes were investigated (C30 and ...
  • Historical Greenland glacier calving front locations from 1973 until 2013Open Access Icon 

    Liebezeit, Charlotte; Loebel, Erik (Technische Universität Dresden, 2023)
    This product contains 170 Greenland glacier calving front positions from the following glaciers: Hagen Bræ, Helheim Glacier, Kangiata Nunaata Sermia, Nioghalvfjerdsbræ, Tracy Glacier and Zachariae Isstrøm. The glacier ...
  • Raw data of the creep tests on cylindrical specimensOpen Access Icon 

    Birkner, Dennis; Marx, Steffen (Technische Universität Dresden, 2023)
    This dataset contains the raw data of the creep tests on the concrete cylinder specimens. Four batches (batch 1 and 2 of concrete C80 and batch 3 and 4 on concrete C30) were tested. Three specimens were placed on top of ...
  • Benchmark instances for the min cost multicut problemOpen Access Icon 

    Irmai, Jannik (Technische Universität Dresden, 2023)
    This dataset contains problem instances of the min cost multicut problem (Chopra and Rao (1993)) which is also known as correlation clustering (Demaine et al. (2006)). The instances come from a variety of applications ...
  • Raw data of the cylinder tests for determining compressive strength and modulus of elasticityOpen Access Icon 

    Birkner, Dennis (Technische Universität Dresden, 2023)
    This dataset contains the raw data of the tests on concrete cylinders to determine the compressive strength and the modulus of elasticity of the different batches. Two concrete mixes were investigated (C30 and C80). The ...
  • Homogenized data magneto-active polymersOpen Access Icon 

    Kalina, Karl Alexander; Gebhart, Philipp; Brummund, Jörg; Linden, Lennart; Sun, WaiChing; Kästner, Markus (Technische Universität Dresden, 2023)
    Herein, homogenized datasets for magneto-active polymers (MAPs) with stochastic particle distribution and reversible magneto-elastic behavior are provided. The data have been generated by using an in-house finite element ...
  • Forming and cutting at high strain rates Part 4: High-speed blankingOpen Access Icon 

    Galiev, Elmar; Tulke, Marc (Technische Universität DresdenFraunhofer Institute for Machine Tools and Forming Technology IWU, 2023)
    Based on the material properties determined in "Forming and cutting at high strain rates Part 1" and "Part 2", the applicability of the methodology and the material characteristics are verified using a high-spped blanking ...

View more