X-Ray tomography measurement of a cubical shaped lithium aluminate slag particle: Raw and processed data set and XCT information

The comminution of multiphase particles depends on several influencing variables, such as the microstructure. This is often described in terms of defects, interfaces and phases. XCT (X-ray Computed Tomography) is used to gain insight into the microstructure of slag particles. Lithium aluminate slag is used as the slag system, with the lithium aluminate as the target phase which needs to be liberated. A slag cube with an edge length of about 4 mm was measured with the XCT (Zeiss Xradia 510 Versa). A 3D representation of the target phase can be obtained by further image processing of the raw data set. The XCT raw data set and the binary data set for the target phase are provided. The measurement and reconstruction settings can also be found here. This supplements ar part of the publication: Utilizing X-Ray computed tomography for lithium slag: A guide to analyze microstructure and its potential influence on liberation.

Dieses Projekt ist Open Access und öffentlich zugänglich.

Auflistung nach

Erscheinungsdatum Autoren Titel Schlagwörter

Sammlungen in diesem Bereich

XCT scan of lithium aluminate slag (LiAlO2 as target phase) [1]

This folder contains raw data TIFF and processed TIFF in which just the target phase is shown in the binary stack. Measurement and reconstruction settings are included.

Anonymen Nutzern werden evtl. nicht alle Bereiche oder Sammlungen angezeigt. Bitte loggen Sie sich ein, wenn Sie Ihre freigegebenen Bereiche und Sammlungen sehen wollen.

Neueste Zugänge

X-ray tomography scan of a cubical-shaped lithium aluminate slag particle (4 mm)

Võ, Thu Trang (Technische Universität Bergakademie Freiberg, 2023)

X-ray tomography scans of a cubical-shaped lithium aluminate slag. This folder is split into the raw data TIFF before image processing, and the processed TIFF. The latter shows a binary stack containing only the microstructure ...