The OPARA service was recently upgraded to a new technical platform. You are visiting the outdated OPARA website. Please use https://opara.zih.tu-dresden.de/ for new data submissions. Previously stored data will be migrated in near future and then the old version of OPARA will finally be shut down. Existing DOIs for data publications remain valid.
Auflistung Bereiche nach Erscheinungsdatum
Anzeige der Treffer 101-120 von 128
-
Unity Logs and Survey Data (collected) for "Correlation Field dependency and Cybersickness"
(Technische Universität Dresden, 2023)The "R&I_2019_Input" folder contains 3 additional folders and 3 files (+ one Readme document which you are currently reading) The file is named "R&I_2019_Experimental Protocol" and contains 3 sheets, these are different ... -
Forming and cutting at high strain rates Part 1: Experimental data and FE-model for an inverse material characterization of DC06 at high strain rates
(Technische Universität DresdenFraunhofer Institute for Machine Tools and Forming Technology IWU, 2023)High-speed processes can lead to significant technological advantages like an increased formability, reduced springback or an improved quality of cutting edges. For conventional forming processes, quasi-static conditions ... -
Monitoring data for the publication "Fast inundation simulation with RIM2D for urban flood risk assessment and forecasting"
(Technische Universität Dresden, 2023)Monitoring data used for model calibration and evaluation from the Urban Observatory of the Chair of Urban Water Management -
Forming at high strain rates Part 2: Analysis of adiabatic heating based on tensile tests of DC06
(Technische Universität DresdenFraunhofer Institute for Machine Tools and Forming Technology IWU, 2023)In high strain rate forming processes two superposing and opposing effects influence the flow stress of the material: strain rate hardening and thermal softening due to adiabatic heating. The presented FE-model and ... -
Supplementary materials for the publication "Generative text-to-image diffusion for map creation based on geosocial media data."
(Technische Universität DresdenInstitut für Kartographie, 2023)Supporting Information for the publication "Generative text-to-image diffusion for map creation based on geosocial media data"(Release v1.0.0). Updates from the peer review process may not be reflected in this submission. ... -
Forming and cutting at high strain rates Part 4: High-speed blanking
(Technische Universität DresdenFraunhofer Institute for Machine Tools and Forming Technology IWU, 2023)Based on the material properties determined in "Forming and cutting at high strain rates Part 1" and "Part 2", the applicability of the methodology and the material characteristics are verified using a high-spped blanking ... -
Forming and cutting at high strain rates Part 3: Deep drawing
(Technische Universität DresdenFraunhofer Institute for Machine Tools and Forming Technology IWU, 2023)Based on the material properties determined in "Forming and cutting at high strain rates Part 1" and "Part 2", the applicability of the methodology and the material characteristics are verified using a deep drawing process ... -
Homogenized data magneto-active polymers
(Technische Universität Dresden, 2023)Herein, homogenized datasets for magneto-active polymers (MAPs) with stochastic particle distribution and reversible magneto-elastic behavior are provided. The data have been generated by using an in-house finite element ... -
Raw data of the cylinder tests for determining compressive strength and modulus of elasticity
(Technische Universität Dresden, 2023)This dataset contains the raw data of the tests on concrete cylinders to determine the compressive strength and the modulus of elasticity of the different batches. Two concrete mixes were investigated (C30 and C80). The ... -
Benchmark instances for the min cost multicut problem
(Technische Universität Dresden, 2023)This dataset contains problem instances of the min cost multicut problem (Chopra and Rao (1993)) which is also known as correlation clustering (Demaine et al. (2006)). The instances come from a variety of applications ... -
Historical Greenland glacier calving front locations from 1973 until 2013
(Technische Universität Dresden, 2023)This product contains 170 Greenland glacier calving front positions from the following glaciers: Hagen Bræ, Helheim Glacier, Kangiata Nunaata Sermia, Nioghalvfjerdsbræ, Tracy Glacier and Zachariae Isstrøm. The glacier ... -
Raw data of the creep tests on cylindrical specimens
(Technische Universität Dresden, 2023)This dataset contains the raw data of the creep tests on the concrete cylinder specimens. Four batches (batch 1 and 2 of concrete C80 and batch 3 and 4 on concrete C30) were tested. Three specimens were placed on top of ... -
Raw data of the cyclic tests on the cylindrical specimens
(Technische Universität Dresden, 2023)This dataset contains the raw data of the cyclic tests on concrete cylinders to determine the number of cycles to failure and the stiffness develpment of the different batches. Two concrete mixes were investigated (C30 and ... -
Dental anxiety and psychologial distress in 263 patients from Albania and Germany
(Technische Universität Dresden, 2023)The dataset contains questionnaire data from 263 patients (N = 133 Germans and N = 130 Albanians). All patients completed the questionnaires Dental Anxiety Scale (DAS) and the Brief Symptom Inventory (BSI-18). Patients ... -
Simulation Data: Indoor Positioning Systems in Connected Aircraft Cabins
(Technische Universität Dresden, 2023)The dataset consist of three .csv files containing the visibility analysis (LOS/OLOS/NLOS) from ray launching inside the aircraft cabin, the anchor states and the results of the probabilistic range sampling. In total 8 ... -
Dresden in vivo OCT Dataset of the Middle Ear
(Technische Universität Dresden, 2023)The data collection contains 43 optical coherence tomography (OCT) volumes from both healthy and pathological middle ears of 29 subjects recorded with a non-invasive endoscopic OCT device applicable in vivo. Due to the ... -
Terminus area change of 17 key glaciers of the Antarctic Peninsula from 2013 to 2023 derived from remote sensing and deep learning
(Technische Universität Dresden, 2023)Glacier terminus area changes are derived using the rectilinear box method applied to time series of glacier calving front locations. Terminus changes are provided in text file and image format. The following glaciers are ... -
Berechnungsfaktoren zur Ermittlung der Lastverteilung und der Zahnfußspannung von Kreuzverzahnungen
(Technische Universität Dresden, 2023)Dieses Datenpaket enthält mehrere XLSX-Dateien mit Berechnungsfaktoren für Kreuzverzahnungen. Diese sind unterteilt in Berechnungsfaktoren YF für die Lastverteilung und in Berechnungsfaktoren YS für die Zahnfußspannung. ... -
Comparative validation of machine learning algorithms for surgical workflow and skill analysis with the HeiChole benchmark
(Technische Universität Dresden, 2023)The data consists of endoscopic videos from general surgery operating rooms. The data was obtained during laparoscopic surgeries at the University Hospital of Heidelberg and its affiliate hospitals, forming a joint center ... -
Measurements for different PEDOT:PF6 fiber networks
(Technische Universität Dresden, 2024)Each folder represents one or more unique PEDOT:PF6 fiber networks. Different types of measurement might be found for each network, including impedance measurements ("Autolab" folder), transistor measurements ("SMU" folder) ...