The OPARA service was recently upgraded to a new technical platform. You are visiting the outdated OPARA website. Please use https://opara.zih.tu-dresden.de/ for new data submissions. Previously stored data will be migrated in near future and then the old version of OPARA will finally be shut down. Existing DOIs for data publications remain valid.
Auflistung nach Titel
Anzeige der Treffer 82-101 von 214
-
Flow velocity tracking in thermal imagery
(Technische Universität Dresden, 2018)Image data set to the submitted WRR publication ”Evaluating Image Tracking Approaches for Surface Velocimetry with Thermal Tracers“. Lab_Experiments_Data file folder includes eight image sequences acquired in lab ... -
Forming and cutting at high strain rates Part 1: Experimental data and FE-model for an inverse material characterization of DC06 at high strain rates
(Technische Universität DresdenFraunhofer Institute for Machine Tools and Forming Technology IWU, 2023)High-speed processes can lead to significant technological advantages like an increased formability, reduced springback or an improved quality of cutting edges. For conventional forming processes, quasi-static conditions ... -
Forming and cutting at high strain rates Part 3: Deep drawing
(Technische Universität DresdenFraunhofer Institute for Machine Tools and Forming Technology IWU, 2023)Based on the material properties determined in "Forming and cutting at high strain rates Part 1" and "Part 2", the applicability of the methodology and the material characteristics are verified using a deep drawing process ... -
Forming and cutting at high strain rates Part 4: High-speed blanking
(Technische Universität DresdenFraunhofer Institute for Machine Tools and Forming Technology IWU, 2023)Based on the material properties determined in "Forming and cutting at high strain rates Part 1" and "Part 2", the applicability of the methodology and the material characteristics are verified using a high-spped blanking ... -
Forming at high strain rates Part 2: Analysis of adiabatic heating based on tensile tests of DC06
(Technische Universität DresdenFraunhofer Institute for Machine Tools and Forming Technology IWU, 2023)In high strain rate forming processes two superposing and opposing effects influence the flow stress of the material: strain rate hardening and thermal softening due to adiabatic heating. The presented FE-model and ... -
FTIR spectra
(Technische Universität Dresden, 2019)FTIR curves of the calibration sets, graphitic schist and artificial soil samples. This data was used as described in section 2.2.1. -
fully saturated and dewatered filter cakes at different resolutions
(Technical University Bergakademie Freiberg - Institute of Mechanical Process Engineering and Mineral Processing, 2021)Appendix to Publications A to E with investigations of different particle systems (material, size and shape variation). X-ray tomography image of fully and partially dewatered filter cakes. The initial slurries contains ... -
GNSS observations of Huawei P30 and a local reference station in RINEX format
(Technische Universität Dresden, 2020)The archive contains GNSS observations in RINEX format: of a smartphone Huawei P30, of a local reference station. They were collected in 8 static observation sessions with an overall duration of 77 h. -
GNSS observations of Huawei P30: raw data from GNSSLogger
(Technische Universität Dresden, 2020)The archive contains GNSS observations of a smartphone Huawei P30. They were collected in 8 static observation sessions with an overall duration of 77 h. These raw data sets were written by GNSSLogger. -
HeLa metaphase spindle tomographic data sets and analysis
(Technische Universität DresdenRobert Kiewisz, 2021)This collection of datasets belongs to the eLife paper titled "Three-dimensional structure of kinetochore-fibers in human mitotic spindles": The collection includes all raw datasets of three HeLa Kyoto metaphase cells, ... -
HeLa metaphase spindle tomographic data sets and analysis for z-expansion data
HeLa dataset for eLife paper including z-expansion data -
High-resolved X-ray tomography scan of dewatered filter cakes and sessile droplets
(Technical University Bergakademie Freiberg - Institute of Mechanical Process Engineering and Mineral Processing, 2021)X-ray tomography image of dewatered filter cakes at irreducible saturation. The initial slurry contains Al2O3 particles suspended in a potassium iodide-glycerol solution. These were separated by cake-forming filtration ... -
HistImage2021
(Technische Universität Dresden, 2021)Supplementary image dataset of the ISPRS International Journal of Geoinformation publication "Fully Automated Pose Estimation of Historical Images in the Context of 4D Geographic Information Systems Utilizing Machine ... -
Historical Greenland glacier calving front locations from 1973 until 2013
(Technische Universität Dresden, 2023)This product contains 170 Greenland glacier calving front positions from the following glaciers: Hagen Bræ, Helheim Glacier, Kangiata Nunaata Sermia, Nioghalvfjerdsbræ, Tracy Glacier and Zachariae Isstrøm. The glacier ... -
Homogenized data magneto-active polymers
(Technische Universität Dresden, 2023)Herein, homogenized datasets for magneto-active polymers (MAPs) with stochastic particle distribution and reversible magneto-elastic behavior are provided. The data have been generated by using an in-house finite element ... -
Impulsive decision-making predicts the course of substance-related and addictive disorders
(Technische Universität Dresden, 2018)Data and do-files for the analyses presented in the paper "Impulsive decision-making predicts the course of substance-related and addictive disorders" Aims of the analyses: To test whether impulsive decision-making (1) ... -
Intermediate dataset of clustered body odor descriptors
(Technische Universität DresdenProf. Dr. Ilona CroyFriedrich-Schiller-Universität Jena, 2023)The dataset shows the intermediate results from 1060 participants from nine countries and five languages: German (Germany, Austria, 414 participants), English (United States, Canada, Great Britain, Sweden, 133 participants), ... -
IV curves obtained from thermionic emission tests with C12A7:e- thick film samples
(Technische Universität Dresden, 2022)Thermionic emission current density measurement of C12A7:e- thick film samples. Samples prepared by Fraunhofer IKTS. Bulk coating: Proprietary composite with C12A7:e-. Thickness: 100 µm. Substrate: Titanium Measurement ... -
Jupyter notebook code and example file for the evaluation of XRR data via FFT
(Technische Universität DresdenIFW Dresden, 2020)This is supplementary information to the publication: "Fast fourier transform and multi-Gaussian fitting of XRR data to determine the thickness of ALD grown thin films within the initial growth regime" -
Jupyter Notebook for the Publication "A Framework for the Description of Multidimensional Particle Separation Processes"
(Technische Universität Bergakademie Freiberg, 2023)Jupyter Notebook that reproduces all used graphs from the raw data. The produced graphs are not the final figures in the publication - several editing steps were undertaken to include color bars, etc.